Dual Power 160A 3p 4p 220V ATS Automatic Transfer Switch for Generator/Solar/Hospital

Product Description

 

AISIKAI AUTOMATIC TRANSFER SWITCH Main Technical Parameters
Conventional thermal current Ith	125A,160A
Copper rated insulation voltage Ui	1000V
Rated impulse withstand voltage Uimp	12KV
Copper rated working voltage Ue	AC440V
Copper rated working current Ie	125A,160A
Rated connection capacity	10Ie
Rated breaking capacity	10Ie
Rated limited short circuit current	Fuse for protection / circuit breaker for protection (100KA / 50KA)
Transfer time I-II	0.45S
Control voltage of the switch motor Us	DC24V AC220V AC280V
Start / Normal	88W
Use category	AC-33A

 

AISIKAI Automatic Transfer Switch consists of SKT, SKQ and ASKQ series. We provide perfect solution with product from general performance CB class to high performance PC class, from none-frequently transfer to frequently transfer.

Our product covers a wide current range from 6A to 6300A innovatively, and easily meets the various requirements of load in civil, industrial and commercial fields.

Our product is suitable for 1, 2, 3 classes of low voltage power distribution system. Our perfect feature configuration satisfies the power switching between utility-utility, utility­generator, generator-generator and more load's uninterruptible backup power supply.

Our product is in compliance with related IEC/GB technical standards, is manufactured according to international standards, and has obtained Chinese compulsory certificate (CCC) and European certificate (CE).

SKT series dual power automatic transfer switch is the most advanced third generation product. Its class is PC and its usage category is AC-33A frequently operate electrical transfer switch.

It's suitable to be used in 50/60Hz 10A-3200A low voltage AC power distribution system for reliable transfer between two power supplies.

It has four working modes: Automatic, Electric, Emergency Manual and Locking.

Classified by volume

Standard type: Type 1, 20A-3200A, 5 kinds volume specification

Ultra-thin type: Type 2, 10A-100A, 1 kind volume specification

Note: Ultra-thin type is 50% smaller than the standard type.

Classified by functions

M:end type(automatic switch to standby and automatic return to main)

X: Three-section type (fire-fighting 0 position)

NAX: Intelligent Three-section type (three-section,MCU type main control

board)

Classified by poles

2P: 2 poles, 1 phase and 2 lines

3P: 3 poles, 3 phases

 

 

AISIKAI Automatic Transfer Switch Technical Parameters

Type

SKT2  Series

SKT1 Series

Shell frame grade current (lnm)

100A

160A

250A

630A

1600A

3200A

Rated current (In)

100

125A

160

250

400

630

800

1000

1250

1600

2000

2500

3200

Conventional thermal current(lth)

10,16,20,25,32,40, 50,63,80,100A

63,80,100,124, 140,150,160A

160,180,200, 225,250A

160,180,200,225,250, 315,350,400,500,630A

800,1000,1250,1600A

2000,2500,3200A

Rated insulation voltage of copper bar (Ui)

660V

800V

Rated impulse withstand voltage(Uimp)

6KV

8KV

Rated operating voltage of copper bar(Ue)

AC400V

Use category

AC-33A

Rated operating current of copper bar (le)

10,16,20,25,32,40,50,63,80,100,125,140,150,160,180,200,220,250,315,35,400,500,630

800,1000,1250,1600,2000,2500,3000

Rated making capacity

10le

Rated breaking capacity

10le

Rated lilit short-circuit current

7KA

13KA

35KA

50KA

75KA

Transferring time I-II or II-I

1.2S

0.6S

1.2S

2.4S

Rated  operating voltage of the control power Us

AC220V (Special voltage DC24V, DC110V, DC220V, AC110V, AC280V)

Start

40W

325W

355W

400W

440W

600W

Nonmal

18W

62W

74W

90W

98W

120W

Net weight(kg) 4 poles

3.5

5.3

5.5

7

17

17.5

37

44

98

AISIKAI Automatic Transfer Switch Performance

1. Double complex contact, horizontal and vertical type frame basically, it have come to "Zero" arc(no arc chute);

2. Reliable machine interlock and elecric interlock, the executive union parts adopt independency overload disconnect switch,
it makes more reliable and safety.

3. "zero" techinique, can force to set"zero" under emergency situation(break off two ways power supply at the same time).Meet the requirement of the fire protection linkage.

4. Operate overload disconnect switch change over adopt singless electromotor drive, switch over smooth and reliable, no noise,
little wallop

5. Operate machine drive motor use only under the executive overload disconnect switch change over instanecus current across, outstanding energy saying.

6. Perform overload disconnect switch with mechanism interlock device. It ensure the common use, standby power working
reliable and not interference.

7. Distinct on and off position indicator, padlock function et.c safe realize the isolator between electric power and overload

8. High security, high automatization, high retiablility, use life more than 8000times.
 

 

AISIKAI Automatic Transfer Switch Normal Working Conditions and Installation Methods
Category	Requirements
Temperature	-5ºC- +40ºC,24H average not mort than +35ºC
Humidity	In the +40ºC conditions,the average humidity not more than 50%,no condensing
Altitude	<2000m,if used at higher than 2000 meters,please use the product at lower ratings
Vibration and gas	Free of strong vibration and impact,harmful gases leading to corrosion against metals and damage to insulation
Surrounding material	Free of thick dust ,conductive particles and explosive material
Class of pollution	III
IP classification	IP20
Storage requirements	Stored at -30ºC to70ºC,in a dry environment without corrosion or salts and the longest period of storage shall be no more than 1 year
Installation	Ver tically or horizontally
Wiring	The standard type is suitable for upper-in and lower-out wiring.Do not wire reversely. The type for lower-in and upper-out wiring can be customized.

 

AISIKAI Automatic Transfer Switch Fast Reading Diagram For Cabinet Body Installation
Current(A)	Switch Lmax(mm)	Switch Wmax(mm)	Switch Hmax(mm)	Recommended cabinet L*W*H(mm)		Compact cabinet L*W*H(mm)
10~100	290	195	142	500 X    400 X  800		500 X   250 X   600
125-160	290	195	142
250	359	195	170
400-630	433	262	270	600 X   500 X  1800		550 X   450 X  1600
800-1250	633	321	350	800 X    600 X   2000		720 X   600 X  1800
1600	633	321	407	800 X    600 X    2200		720 X   600 X   2000
2000-3200	633	500	470	800 X   800 X    2200		720 X  800 X   2000
1. Switch maximum length(Lmax) is the distance from the left elevation of the left installation bracket to the right installation bracket. 2. Switch maximum width0Nmax) is the distance from the rear elevation of the installation bracket to the front elevation of the manual emergency handale interface. 3. Switch maxmum height{Hmax) is the distance from the top elevation of the upper copper bar to the bottom elevation of the bottom copper bar. 4. Forthe cabinet height,please consider the actual situation of the space required for the operation and connection of the cables.

                  A) How could I get a sample?
                        Before we received the first order, please afford the sample cost and express fee.
                        AISIKAI will return the sample cost back to you within your first order.

                   B) Sample time?
                        Existing items: Within 3 days.
 

                   C) Whether you could make our brand on your products?
                        Yes. We can print your Logo on both the products and the packages if you can meet our MOQ.

                   D) What's about MOQ? Delivery time ?
                        1pcs for ATS. Normally less than 1000A ATS with stock, quick support.

                   E) How to guarantee the quality of your products?
                        1) Strict detection during production one by one.
                        2) Strict inspection on products one by one before shipment and intact product packaging ensured.