| SPECIFICATIONS |
| ltem |
Content |
| Working voltage |
AC power L1N1/L2N2 supply,voltage rangeAC170V~277V |
| Overall power consumption |
≤3W(Standby mode:<1W) |
| AC voltage input |
3 phases 4 lines(ph-N) |
AC170V~AC277V |
| single phase 2 lines(ph-N) |
AC170V~AC277V |
| 2 phases 3lines(ph-N) |
AC170V~AC277V |
| Rated frequency |
50/60Hz |
| 1#closing relay output port |
5A AC250V Passive output |
| 2#closing relay output port |
5A AC250V Passive output |
| Breaking relay output port |
5A AC250V Passive output |
| Relay output 1 |
10A AC250V Passive output |
| Relay output 2 |
10A AC250V Passive output |
| Generator start relay |
7A AC250V Passive output |
| 1#closing input port |
Effective when connect with COM2 |
| 2#closing input port |
Effective when connect with COM2 |
| Force open input port |
Effective when connect with COM2 |
| Communication |
Rs485 interface,MODBUS protocol |
| Outline dimensions |
139mmx120mm×48mm |
| Hole dimensions |
130mm×111mm |
| Working conditions |
Temperature:(-25~+70ºC)Relative humidity:(20~93)%RH |
| Storage conditions |
Temperature:(-25~+70ºC) |
| Protection level |
Ip55 when waterproof rubber ring is mounted between controller and control panel. |
| Insulation strength |
AC2.2kV voltage is applied between AC high voltage terminal and low voltage terminal,the leakage current is no larger than 3mA in 1 minute. |
| Weight |
0.51kg |
SKR2-A automatic transfer switch controller is based on the micro-processor core.It can accurately detect the three phases/single phase voltage of the dual power supplies,make accurate judgement of voltage anomalies (power loss,over voltage,under voltage,phase missing,over frequency,under frequency),and control the switching of ATS after delay.
1.LCD is 128*84,with backlight,two languages (Simplified Chinese and English)display,buttonoperation.;
2.Has functions of over voltage,under-voltage ,phase loss,reverse phase sequence,over frequencyand Under-frequency:
3.Has automatic /manual state,in manual mode,it can be forced to switch on or off;
4.All parameters are programmable on site,using two level password to prevent non professional toincorrect operate:
5.Apply to one breaking terminal ,two breaking terminals and NON breaking terminal;
6.Two N lines are isolated by voltage transformer;
7.DC power supply or AC power supply;
8.Standard 485 communication interface with ModBus communication protocol,has remote control,remote communication,remote detection "three remote"function;or use front-end intelligent equipmentprotocol (YD/T 1363.3-2005)to remote detect cabinet status and to remote ATS switch on and off.;
9.Suitable for multiple wiring types (three phase four wire,single phase two wire,two phase three wire).
| Item |
function description |
| 1#power indicator light |
On when 1#power is normal,flash when 1#power is abnormal,off when 1#power has no electricity |
| 2#power indicator light |
On when 2#power is normal,flash when 2#power is abnormal,off when 2#power has no electricity |
| 1#closing indicator light |
On when switch 1#auxiliary contact is effective,off when not effective |
| 2#closing indicator light |
On when switch 2#auxiliary contact is effective,off when not effective |
| Automatic mode indicator light |
on when controller in automatic mode,off when in manual mode |
| Manual mode indicator light |
On when controller in manual mode,off when in automatic mode |
Note:the detailed indicator lights description in parameters setting mode,please view the "Panel Operation of Parameters Setting".
Installation dimensions
Schematic diagram of electrical wiring
A) How could I get a sample?
Before we received the first order, please afford the sample cost and express fee.
AISIKAI will return the sample cost back to you within your first order.
B) Sample time?
Existing items: Within 3 days.
C) Whether you could make our brand on your products?
Yes. We can print your Logo on both the products and the packages if you can meet our MOQ.
D) What's about MOQ? Delivery time ?
1pcs for ATS. Normally less than 1000A ATS with stock, quick support.
E) How to guarantee the quality of your products?
1) Strict detection during production one by one.
2) Strict inspection on products one by one before shipment and intact product packaging ensured.
){kind=link}
){kind=link}